No-Drill Brick-Clamp Mount for Ring Battery 3, 3+, 4, 2nd Gen, Standard, Plus, Pro, 2019 - 2026

This is a PETG plastic mounting accessory with stainless steel hardware. Doorbell and batteries are not included. The mount contains no batteries or wood.

Easily mount your smart doorbell without drilling into your brick! Perfect for renters and homeowners alike.

Before Purchasing: Measure the distance between the top edge of the bottom brick and the bottom edge of the top brick in the location in which you intend to install the mount. See image above for a visual reference guide. Please enter the measured distance into the personalization box. Please do not order without measuring. Orders made without the distance provided will be cancelled.

Please ensure that the depth of your mortar is at least 3/16" deep minimum with a nice square edge for the mount to grab, as shown in the the pictures. Do not hesitate to reach out before purchasing to ensure compatibility.

Supported Smart Doorbell Models:
Option 1: Ring (Non-Removable Battery): 2nd Gen (2020), Standard (2024) 
- Part Numbers: 5UM5E5, 5F97F2

Option 2: Ring (Removable Battery): 3, 3+,4 (2021) , Plus (2024) , Pro (2024)
- Part Numbers: 5AT3S9, 5UM6E5, 5F77E9, B0B2BY4ZG7

Option 3: Ring 2nd Gen (2026), Standard (2026), Plus (2026), and Pro (Removable Battery) (2026)
- Part Numbers: 5DFYA5, 5DCFAB, 5DFYA6

What's in the Box?
- Ring Battery Mounting Plate Assembly (With tightening screws attached)
- 2.5mm Allen Wrench
- M3x12 Phillips Machine Screws

Key Benefits:
✅ No drilling into your brick, stone, or siding. Our mount clamps into the mortar joint of your brick! Minimum Distance of 2 - 5/8" (66.5mm) and Maximum Distance of 3 - 1/4" (83mm)
✅ Symmetrical, works on either side of your door
✅ Engineered, secure fit for your specific doorbell model. Not a loose "universal" fit like other mounts.
✅ UV-resistant, high-heat resistant PETG material for long-lasting durability up to 176°F or 80C
✅ Only #1 Phillips screwdriver (not included) and a 2.5mm Allen wrench (included) is required for installation
✅ Includes 18-8 stainless steel mounting hardware
✅ Installation guide included in photos above

Installation Notes:

1. Position the mounting base against your brick, ensure the plate sits flat against the brick. Clear any debris that may be in the way and ensure the clamping paws are making full contact with the flat corner of your brick. 
2. Use included Allen wrench to tighten the two (2) screws from the bottom. Tighten until snug. 
3. Following the Ring provided instructions, install your doorbell to the mounting plate using the four (4) included M3x12 machine screws.
4. You're done!

** See visual guides in the photos above**

Dimensions & Options:
- Mounting plate: ~4.0" W x 5.0" H
- Compatible with Ring battery only doorbells

Professional installation recommended. Cub3D Creations, LLC is not liable for any doorbell damage due to improper installation or use.

Disclaimer: This product is an independent accessory designed and manufactured by Cub3D Creations, LLC and is not affiliated with, endorsed by, or sponsored by Ring, or any other brand listed. All brand names are used solely to indicate compatibility.